Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)

In cooperation with a specialized company Filter Technik Slovakia, s.r.o. focused on tribotechnology and tribodiagnostic, our company is able to provide customers with:

  • consultancy in the field of tribotechnics and filtration of process cutting fluids
  • performance of physico - chemical analyses of process fluids and oils and assessment activities
  • Filtration of process oils and emulsions – removal of solid mechanical contaminants ( chips, abrasives, dust particles, fibres and others ) and soft sludge up to 1 micron absolute.
  • choose a suitable filtration technology for your industrial production
  • recovery of oils for other primary or secondary uses - R9

Advantages of process fluid recycling:

  • Reducing the cost of maintaining machinery in the production plant
  • Reduction of costs related to established downtime of machinery in production
  • Reduction of costs in connection with the elimination of a possible equipment accident, which may occur if the real state of the quality of cutting fluids is not monitored
  • Reduction of the required volume of cutting fluids
  • Reduction of costs in terms of minimizing the purchase of liquids, which must be continuously replenished in production
  • The service life and functionality of machinery in production is extended
  • It reduces the financial costs to the customer that he would otherwise have to spend on the disposal of the generated production waste

Various impurities enter the process cutting fluids, such as process oil or emulsion, which can only be removed by thorough filtration and purification of these fluids.

During metalworking, there is a proportional loss of cutting fluids (whether oils and / or emulsions) due to spraying, evaporation, and chip removal. This decrease can represent 7 to 10 % for aqueous solutions, 4 to 8 % for process emulsions and 0.4 to 0.8 % for process oils per working shift. Aqueous solutions and emulsions require the most frequent replacement. Perfect cleaning is required especially when grinding. By constantly replenishing the loss of cutting fluid, it is continuously renovated. Of course, the loss of fluids must be replaced by the addition of a significant amount of process fluids, which represents a financial cost to the customer. The total costs associated with cutting fluids represent an estimated 10-20 % of the total production costs.

Liquid recycling is therefore undoubtedly a cost-effective and ergonomically cost-effective solution. The cleaned cutting fluids can then be returned to production. Great emphasis is required on the constant care of cutting fluids and their regular care.

One of the ways to properly care for and treat cutting fluids is to provide so-called "Fluid management", i.e. setting the necessary rules regarding the correct choice of fluids, checking the suitability of their application, quality control, their necessary maintenance, as well as the recycling of these cutting fluids itself.

Data sheet FTS-BFU-505

FTS-BFU-705-6HYP

FTS-BFU-X100

Data sheet

Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)
Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)
Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion) Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)
Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion) Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)
Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion) Recycling of processing fluids and oils (hydraulic oil, processing oil and processing emulsion)

MVE - ENERGO, s.r.o.

Priemyselná 1/4412
031 01 Liptovský Mikuláš
Slovakia